Hooray...you got a new favorite cup and want to put your STICUPS on it, but it's on another cup.
Additional adhesives they are available in our storeor by calling 844-525-5200.
It's easy to change your STICUPS to your new cup:
To remove STICUPS plastic disc and/or magnet disc, use mono-filament line to separate the disc from the surface.
Remove old adhesive.
Take care to keep the magnet in the correct position in the STICUPS plastic disc. Flipping the magnet over accidently will filp the polarity of the magnet making it resist the mounting disc or metal surface instead of attract to it.
Grab your new cup and thoroughly clean and dry the desired mounting surface you are appling your STICUPS to with a lint free denatured alcohol wipe.
With a sharp object, carefully separate the red backing from the adhesive on the STICUPS plastic disc and attach it to the bottom of your cup. For best adhesion, firmly hold the STICUPS plastic disc against the surface being adhered to for 30-60 seconds. Ultimate bond strength of the adheasive will be achieved after 24-48 hours.
Repeat Step #5 with magnet disc in desired location.
HOW STICUPS WORK
INSTRUCTIONS FOR INSTALLATION
Using STICUPS is as simple as 1, 2, 3. See the simple instructions below:
Find your favorite cup.
Thoroughly clean and dry the desired mounting surface you plan to apply your STICUPS to with a lint free denatured alcohol wipe.
Peel off the red backing from the adhesive on the STICUPS plastic disc and attach it to the bottom of your cup. For best adhesion, firmly hold the STICUPS plastic disc against the surface being adhered to for 30-60 seconds. Ultimate bond strength of the adhesive will be achieved after 24-48 hours.
Repeat Step #3 with magnet disc in desired location.
